-
We have an application with a Raspberry pi using SNAP7 and a S7-1214. The application was workin smoothly but the PLC was programmed in TIA PORTAL V13.0 (wich is not compatible with new versions of T…
GG846 updated
3 years ago
-
_(As briefly discussed through email in the end of 2019)_
Sally7 provides a great experience for the client part of the S7 protocol, but there is no server component at the moment. It means you need …
-
Access denied by device during fuzz test when establishing connection with Siemens PLC
-
### What happened?
I have tag `Mod1.FDPRT.PAP2.Axis[3].Drive.NcToPlc.ActTorque`
`"Axis[3]"` its not an array, its name of plc tag, so i expext that everything works okay, but seems like it is not pa…
-
Hello...
I've been trying to use this command to scan Conpot and get information from it:
`nmap -A -Pn -p1-1000 172.20.10.2`
The output of this scan will come back as in the photo shown bellow:
…
-
Hi, I'm using the hardware that has been used in the test of the maker.
Unfortunately, it does not connect. What can I do possibly wrong?
_The IP-Address of the internal adapter has to be config…
-
Snap7 server only supports read of up to 20 dataItems in a single request. I'm not sure why they chose this, but I did email the author of Snap7 to see if I can get an explanation.
Although at firs…
-
In order to make conpot more accessible, we should make all protocols optional. for example we should have a "enabled" option in the configuration. On conpot start-up we should also check if we can im…
-
I got a struct with size 16 Bytes and at the end, I also define 4 bool(bit) fields, which brings size up to 16.5 as GetStructSize adds 0.125 per bool field it finds.
At the end of GetStructSize, yo…
-
I have created a custom topology through mininet and running the pythess pox controller as a remote controller. On running the pingall() command, certain nodes are not reachable.