-
**Name of Board**
NodeMCU ESP8266
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
ESP8266
**Hardware URL**
https://www.amazon.com/HiLetgo-Internet-Development-Wireless-Micropython/…
-
This HAL for ATSAMD51 has support for the NVM and the Smart EEPROM feature. Similar to the SAMD51, the SAMD21 has some flash reserved for EEPROM-like functionality, which can be written while the main…
-
I asked CircuitPython core developers @tannewt and @dhalbert and they indicate that it should be possible to add support in CircuitPython for the Doppler even though it does not have external SPI flas…
-
Shouldn't the lines 8 and 9 in the "init_samd51.c" file be commented out?
```
// Output GCLK0 to Metro M4 D5. This way we can see if/when we mess it up.
PORT->Group[1].PINCFG[14].bit.PMUXEN = tru…
ghost updated
6 years ago
-
I'm a beginner attemping to port MicroPython to SAME54 (Xplained Pro board).
So I turns out I have to load the required ASF4 stuff for SAME54 to be able to compile.
**Is tools/update_from_atmel_st…
-
Tried several SAMD51 based boards, they all seem to produce similar errors in Arduino IDE.
The display is a [3.5" 480x320 adafruit HX8357D](https://www.adafruit.com/product/2050).
Display driver use…
-
### CircuitPython version
```python
Adafruit CircuitPython 8.0.2 on 2023-02-14; Adafruit Feather M4 Express with samd51j19
```
### Code/REPL
```python
# SPDX-FileCopyrightText: 2018 Katt…
-
**Name of Board**
ESP32-S3-WROOM-1 Dev Board - 8MB Flash
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
ESP32
**Hardware URL**
https://www.espressif.com/en/products/devkits/esp32-…
-
Up front, this is a custom design, based on ItsyBitsy M4. I've made several variants based on your excellent ItsyBitsy M4 foundation but this is the first time I have wanted to use the hardware UART. …
-
Hello!
Have you seen this?
[(https://github.com/UT2UH/ESP32-Chimera-Core)]
I think it's much better stack to accompany with M5ez.
LovyanGFX used by Chimera Core has also support ESP-IDF - so M5ez …
UT2UH updated
3 years ago