-
**Reported by:** [costake](https://github.com/costake)
**Original Ticket:** [ipmitool/bugs/36](https://sourceforge.net/p/ipmitool/bugs/36)
ipmitool sdr -v
Sensor ID : Temp \(0x1\)
En…
-
ipmitool sdr -v
Sensor ID : Temp \(0x1\)
Entity ID : 3.1 \(Processor\)
Sensor Type \(Analog\) : Temperature
Sensor Reading : -69 \(+/- 1\) degrees C
Status …
-
ipmitool sdr -v
Sensor ID : Temp \(0x1\)
Entity ID : 3.1 \(Processor\)
Sensor Type \(Analog\) : Temperature
Sensor Reading : -69 \(+/- 1\) degrees C
Status …
-
### Problem description
Hello like to get the Smartthings 2019 plug working in ZHA properly power readings and on off works but voltage, current and energy kwh are not working.
Energy gets readi…
-
First of all, a big thank you to e6on for publishing this project.
Now, I am repeatedly getting erroneous readings.
**Here's a few observations:**
- It is not caused by bad sensors. I have an…
-
**Original report ([archived issue](https://osrf-migration.github.io/gazebo-gh-pages/#!/osrf/gazebo/issues/1746)) by Ian Chen (Bitbucket: [Ian Chen](https://bitbucket.org/%7Beaa6fca5-6deb-43f6-907f-97…
-
Currently, `fancontrol` operates directly on sysfs files. The number of hwmon drivers increases. For example, my computer currently provides hwmon readings from acpitz, it87, coretemp, nvme_hwmon and …
-
I would like to be able to select to use remote sensors so I can report on my Gaming PC via my Streaming PC with streamdeck . I have the remote sensors showing in my HWinfo sensor list but are not vis…
-
```
As you know the CC128 supports 9 "appliance" sensors as well as the main
"house" sensor.
In our office we have two meters (don't ask), and CurrentCost advised us to
set it up as follows: one tran…
-
```
As you know the CC128 supports 9 "appliance" sensors as well as the main
"house" sensor.
In our office we have two meters (don't ask), and CurrentCost advised us to
set it up as follows: one tran…