-
First of all great book and learnt many concepts from it but still somethings are confusing which i have listed below, if you can give me insights on it, that would be great.
i have seen the code a…
-
Hi,
I found your post on the arduino.cc forum
https://forum.arduino.cc/t/osc-over-usb/520680/13
Thank you very much for sharing this.
I plan on connecting a couple of joysticks to VCV Rack usi…
-
the port connection is currently handled using pogo-pins on the port side and bolts on the robot side. a solid connection good enough for serial port communication relies on the robot pressing firmly …
-
I followed the steps( I have flashed px4flow.px4 & px4flow-klt-06Dec2014.px4... ) in the Internet to use px4flow. ( [http://ardupilot.org/copter/docs/common-px4flow-overview.html](url) )
px4flow wo…
-
Do the esp32 boards work? I always get board def errors?
invalid fqbn
-
Whenever I try to connect any of the DHT, Servo or LiquidCrystal hardware, I get a Serial Timeout error. Here is a sample program for DHT:
```shell
Python 2.7.12 (default, Nov 19 2016, 06:48:10)
…
-
Hello, just a doubt, I would like to see the raw data coming to the bluetooth, I have a clone controller but none of the configurations done is working with this controller thus, I would like to know …
-
Hi I tried to rebuild firmware for S42B-V2.0 version. It works, however, built firmware has only 35kB while pre-build firmware 2.0 has 54kB. This is ok, but the OLED display refreshes very slowly when…
-
We have a nice web-based light ground station system to monitor our boat. It is good enough for simple tasks and missions in this competition.
In a long run, we may need:
1. On server side, better g…
-
```
What steps will reproduce the problem?
1. I Upgraded my srv-1 robot(not stereo) to srv-blackfin-011809. I Am able
to connect via terminal (telnet ) and send commands but when i use java
console it…