-
Hello, I've followed this tutorial https://www.instructables.com/id/ESP8266-HomeKit-NeoPixel-Light-Strip/ - and almost everything went smooth.
After flashing and getting strip to work there was issue…
-
### What would you like implemented?
Would it be possible to add support for RGBW LEDs? i cannot specify white channel used in for example SK6812 for higher brightness.
Or even better, just option…
-
I'm wondering if it'd be possible to add support for NeoPixel-type RGB LED strips (https://www.adafruit.com/product/1376) - these are basically just arrays of WS2812 or SK6812 individually-addressable…
-
When asking my LED strip (`SK6812_STRIP_GRBW`) on my _Raspberry Pi 3 Model B_ to turn on blue LEDs only, white LEDs are also turned on.
The Red and Green are perfect, but the Blue seems to be lighter…
-
As the title says. I have a strip of SK6812 LEDs and for each pixel they have 4 LEDs, one of which is white. Currently, I can support it by having the Arduino set the strip to white if it receives a c…
-
Could we add WS2811 and WS2812 control to Freejoy?
Using WS2811/WS2812 really opens up LED backlighting options to us. Powerwise, we would need to interface it with a transistor circuit, then provi…
-
## Describe the Bug
The last LED in the row of addressable RGB LEDs on my keyboard fails to light up when using the standard firmware. Increasing the number of LEDs defined in config.h by one solve…
-
**Is your feature request related to a problem? Please describe.**
ISSUE: Automatic current limiter does not take in to account different power draw for white channel on RGBW strips. If you set you…
-
Add internal cockpit map, console and flood lighting. @bnepethomas
### Summary:
Add complete interior cockpit lighting system to OH consisting of:
- [ ] Chart Light (Canopy Bow, if exists)
- […
-
The protocol specified command 0x00 to send RGB data per pixel. As there are now LED strips with an additional white led, which expect RGBW data, which contains an additional 8 bit value for the white…
a-v-s updated
6 years ago