-
First of all, thanks for the nice scripts / containers.
But i got the issue while my solarflow battery is full it goes into passthrough mode. After that my 4 connected panels (2 to the sf-hub and 2…
-
Hi @reinhard-brandstaedter,
for some reason there is no power delivered to my home, even tho the battery is full and bypass got enabled.
Here is some log output, do you have any idea what's go…
mavo updated
3 months ago
-
Hey,
here are some logs:
```
2024-05-02 18:32:50,699:INFO: HUB: S:0.0W [ 0.0 ], B:100% (100|100), V:49.9V (49.9|49.9), C: 0W, P:True (manual, not possible), F:0.0h, E:-1.0h, H: 0W, L:800W
2024-0…
-
- [ ] suggest tags for comments
https://twitter.com/colinmegill/status/1285032126774218760
- [ ] suggest possible expertise for participants based on twitter profile
https://twitter.com/colinmegi…
-
Hello @reinhard-brandstaedter,
I switched to newest dev build and I am confused. It said turn on BP, but its still not on.
```
2024-05-06 15:11:54,367:INFO: MQTT User is not set, assuming authent…
mavo updated
3 months ago
-
Good morning,
Controlscript actually doesn't limit Inverter if Battery is pused to Grid far to high until its empty
> 2024-04-18 08:30:54,992:INFO: Based on time, solarpower ( 0.0W) minimum cha…
-
`2024-05-02 22:02:09,533:INFO: Hub has just recently adjusted limit, need to wait until it is set again! Current limit: -1, new limit: 300
2024-05-02 22:02:09,533:INFO: Solarflow is willing to contri…
-
Hi @reinhard-brandstaedter,
only saw it once - and it seem to had no effect on the actual power of the inverter, but still want to let you know.
For a reason, the app determined an inverter limit …
mavo updated
4 months ago
-
Hi @reinhard-brandstaedter,
I noticed, that in cases the demand prediction was wrong in one or the other way but then the demand stays stable, it happens that the output does not match whats actual…
mavo updated
5 months ago
-
Hi,
today morning I observed that whilst in offset + direct panels the limit did not get increased whilst the battery was anyways in CT mode.
Attached a screenshot
![image](https://github.com/…