-
Hi,
I've been trying to set up my machine with the Trinamic TMC 5160 drivers that use SPI mode. Looking through this current implementation, it doesn't look like the SPI bus was implemented as a HA…
-
For more detail, see here:
http://dorkbotpdx.org/blog/paul/spi_transactions_in_arduino
At the moment this OLED device cannot be operated at the same time as the [Adafruit BLE device](http://www.…
-
Blank page on : https://keycloak.mydomain.com/auth/admin/master/console/
upgrading from
2.3.0 -> 2.4.4
keycloak is running on port 8080
```
extraEnv: |
- name: KEYCLOAK_ADMIN
…
-
### Category
BLE, Other
### Hardware
Not Applicable
### Firmware Version
All Recent
### Description
ESP32 OTA mode is broken. You can reboot into OTA mode however it automatically reboots withi…
-
I need to checksum data that isn't an integer multiple of 8 bits in length.
I'm working on an interface library for a SPI device that uses CRC to validate frames on the SPI bus. The frames are ma…
-
Basically, the current SPI implementation is meant for sending bulk amounts of data eg. When we do a chirp and listen on the sonar system, the microcontroller has two buffers (for left and right micro…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
Schematic diagram
[jc3636w518.zip](https://github.com/user-attachments/files/16201959/jc3636w518.zip)
-
I have the Luckfox Pico Max and i want to connect an i2s DAC to it, is it possible to change the pins of an interface for example the SPI to i2s using the device tree?
-
This repository is only focusing on UDP communication with RP2040 over Ethernet. Were there any attempts to interface RPi Pico to RPi running LinuxCNC directly using SPI?
tpimh updated
1 month ago