-
an implementation for standard firmata is [here](https://github.com/ajfisher/node-pixel/tree/master/firmware/build/node_pixel_firmata) based on Adafruit_NeoPixel lib.
As alternative, [FastLED](http…
-
### Describe problem solved by the proposed feature
PX4 does not support QSPI flash storage
### Describe your preferred solution
Support QSPI flash storage
### Describe possible alternativ…
-
**Vendor/Model**
`CRAZYBEEF4DXS`
As seen on Happy Model fc with internal SPI DSM2/DSMX rx(Compatible with SPEKTRUM DSM2/DSMX protocol radio transmitter).
https://www.happymodel.cn/index.php/2019/…
-
Hi,
In the _mapped_input_types.h_ there is duplicated code
```
typedef struct __attribute__( ( packed, aligned( 1 ) ) )
{
uint8_t spi_protocol_rev;
uint8_t …
-
Hi, A feature that would be super-useful and provide a unique advantage for the FlexIO SPI over the standard SPI support, would be dual SPI. The dual SPI capability is ubiquitous among modern ADC's.…
-
# ESP32-C5 support status in ESP-IDF
ESP-IDF v5.4, currently in development, will include initial support for the mass production version of the ESP32-C5 chip.
In the list below, supported featu…
-
I have built one snsor whit a GPS M10 series, and I have connected it to a FRSKY receiver and Tx X20S. The data of Lat, Lon, Alt, Speed work correctly but the route always marks zero. Does anyone ha…
-
- Determine which devices use which communication protocol
- SPI config for SPI devices
-
**Describe the bug**
From a hazelcast client (5.3.1) we are accessing a remote ring buffer (hazelcast server 5.3.1) trying to insert a byte[] record. This procedure works as expected.
In addition …
nthed updated
9 months ago
-
I've spent some time gathering information on how to get the Manta M5P to use the CANBUS with a CB1.
I first flashed klipper to the EBB36 according to the instructions in the manual.
Connected are 2…