-
I don't know if Linux is officially supported but I got it to work. Only problem was with some lower/upper-case file names. I had to edit these lines to use upper case "PLUS" to get it to work
```bas…
-
It is cleared only with step through debug session.
But if I put breakpoints on line 6816 and line 6822, the second breakpoint will not be reached.
The reason is that UIF flag is set, though not im…
-
Hi
During some development phase, we could need to force to install a pack even if the version is not the latest.
I would like to avoid this kind of error:
```
$ cpackget add STMicroelectronic…
-
As you can see here: https://github.com/STMicroelectronics/STM32CubeG4/blob/29e23e9f45f0a495eafbfb341d98d65ca967e6ff/Drivers/CMSIS/Include/cmsis_gcc.h#L2129-L2152
The version in this repository is …
-
Hi, I cannot get a simple DCS-BIOS sketch to compile on my STM32F103C8 blue pill.
I can however compile and upload the simple Blink sketch and another sketch which reads potentiometer outputs etc wit…
-
**Additional context**
- I don't understand what `adrBlockFound` does here, because every time it comes in it's a `false` assignment; A value of `true` below does nothing.
- I think this variabl…
-
### Discussed in https://github.com/stlink-org/stlink/discussions/1381
Originally posted by **DF4OR** March 26, 2024
Hi.
Beginner here.
I have sucessfully used other boards (e.g. Nucleo-F09…
-
Hi, I'm trying to compile gnu-tools-for-stm32 (arm 7-2018-q2-update) and get the binary that comes with STM32CubeIDE (1.5.1)
```
com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-…
-
### Device name
ST LIS2HH12
### Device description
This is a ultra-low-power 3-axis accelerometer IC. It's full scale is selectable between +-2g, +-4g and +-8 g and the output rate can be between 1…
-
I described several locking and concurrency problems of HAL_ETH in issue #72 #71 #70 and #69. This is another one related to the improper or missing locking via `gState `and `HAL_ETH_STATE_BUSY`.
I…