-
Hi,
I have a raspberry pi that is connected to a tinyG for a cnc like machine. On the pi runs a node program that sends gcode directly to the tinyG every time it needs to move. In the startup of my…
-
Just updated (apparently successfully, since other things are working) to the latest TinyG firmware (tinyg-master-380.08.hex).
Now in the Chili window, things are not updating. The preview is not fo…
-
mingw 10.2.0 has been released on 2021/01/12.
However, the included gcc 10.2 was not able to build tinyg 0.16 and dev branch.
https://chocolatey.org/packages/mingw#versionhistory
I was able to bu…
-
Firmware: v2105260
Device: TTGO Lora 32
Hi!
I just spotted that my TinyGS started playing Wifi-Accesspoint due to local network maintenance.
It failed to connect to the pre-configured acce…
dm5tt updated
2 years ago
-
This file that comes with AVRDude when downloaded with Serial Port JSON server is 19 bytes and shows file name as text only. The file stops not allow for flashing an Arduino uno. It does say downloade…
-
I have a Synthetos TinyG v9 board153v9k PCB, and I would like to put the latest g2core firmware on. Is this board supported as a target? Do I need to use the g2 firmware, or the original TinyG firmw…
-
Hello!
Is there a particular platform (Rasp. Pi, Arduino, ESP32, etc.) and a particular LoRa device that is recommended for compatibility with your project?
There seem to be a lot of choices in …
K4KDR updated
3 years ago
-
Hello!
I have a V0.97 TinyG with firmware build 440.20.
I had a touch plate Z probe setup working. Now it doesn't work.
I've confirmed no broken wires by continuity test.
I've set zsn to …
-
This is a great slim Serial -> Web Socket project. The close commands seems to be broke, at least on Windows. Can't close the port,
open COM1 115200 tinyg
Opening serial port COM1 at 115200 baud
.
.…
-
Hello All,
At the recommendation of the forum moderator, I am posting this issue here. Any guidance would be appreciated.
I am using a tinyG v8 in an internally developed 3D printer application…