-
I am running a 5161 on an ESP32, I am getting '0 1 292' and the motor is not moving, this is what i have wired
EN_PIN -> 14
MOSI ->MOSI
SCK -> SCK
CS -> SS (i have tryied Salve Select and a non-…
-
## Environment
```sh
sáb 02 nov 2024 09:48:51 -03
radare2 5.9.7 32870 @ linux-x86-64
birth: git.5.9.6-119-ge25d1beb23 2024-11-02__12:45:12
commit: e25d1beb23397520603ed78d98ed468698fe0abf
opti…
-
I've been trying to get a BLTouch setup with my Ender 3 and E3 Mini 1.2 board. But the firmware won't load and i get a TMC Connection Error.
What does this actual error mean?
I've tried compilin…
-
I would like to monitor the torque output of a stepper motor driven by TMC2209.
I tried to read the stallguard values from TMC 2209 using the provided example - StallGuard_TMC2209.ino.
However, the…
so999 updated
11 months ago
-
I have a new SKR 2 rev B board and 5 BTT TMC2208 v3 stepsticks - I am getting "TMC CONNECTION ERROR" from the display at boot up, and M122 just shows:
Testing X connection... Error: All LOW
…
-
When adding the TMC plugin to Netbeans, the URL http://update.testmycode.net/tmc-netbeans_test/updates.xml times out. Is it down? Was working on the same machine before.
-
Please provide feedback for the course below. Thanks so much for your feedback and contributions!
-
Please provide feedback for the course below. Thanks so much for your feedback and contributions!
Nothing to complain here, one thing that'd be great though would be a faux gui demo or a link to a la…
-
with SB2240 after 20/30 minutes of printing I get the error 'tmc "extruder" reports error : GSTAT: 00000004 uv_cp=1 (undervoltage!)
(Ldo nema 14 pancake run_current: 0.65)
both motor and board are…
-
So the TMC extension is not working at all. It say when opening it/trying to download it that the extension tests are failing.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to visual…