-
**Describe the bug**
I am using a [Waveshare 1.69inch Touch LCD Module 1](https://www.waveshare.com/wiki/1.69inch_Touch_LCD_Module) which states it uses a cst816s driver for touch, yet in my testing …
-
Hello Team,
I bought two Jetracer pro AI ki
I have followed the instruction mentioned in the wiki page and downloaded the lastest 4.5 package zip file and flashed in microSD card( 62GB, UHS1). H…
-
Hi,
I have no /dev/can0 , only a can0 Interface. So I can't setup a sllcan0?
The 'candump -tz can0' is running.
BG
-
This code is great and so useful! I have a Waveshare esp32-s3 7” and the touch isn’t always working so I needed to understand the io_expander.
Just one point, for
expander->multiPinMode(TP_RS…
-
Would it be possible to adapt the code to output to an LCD with built in keypad such as the Waveshare one:
https://www.waveshare.com/wiki/Pico-LCD-1.14
It is 240x135 65k colour, SPI and has a 4-…
-
I am very happy to have found this very simple example programme for the Waveshare display. Thanks for that.
Unfortunately it does not respond to touching the screen.
I would also like to know how …
-
Hi,
I like this code very much, but have issues compiling sample file Waveshare_2_13_T5
- Function TitleCase is missing,
- Function obtain_wx_data is missing,
- Function DecodeWeather is missi…
-
I can't get my display to update with the new 2.3 driver board, I have PWR connected to 3.3V
I'm using an ESP32 DEV board
here's my pin out for the display
BUSY = 25;
CS = 15;
RST = 26;
…
-
What would be involved with supporting waveshare-rp2040-eth? Tinygo already supports the waveshare-rp2040-zero.
https://www.waveshare.com/rp2040-eth.htm
Is it basically a waveshare-rp2040-zero w…
-
How do I install CANHAT from waveshare on `CB1`. I believe it needs
```
dtparam=spi=on
dtoverlay=mcp2515-can0,oscillator=12000000,interrupt=25,spimaxfrequency=1000000
```
but not sure how to g…