-
[Telemetry-XBee](http://ardupilot.org/copter/docs/common-telemetry-xbee.html)
Based on discussions in https://www.facebook.com/groups/thecubeautopilot/permalink/1953780218037924/, it looks like th…
-
Today another flyer showed up at the field and switched on his telemetry while I was flying. He was using APM Planner 2.0, and he received a warning on the screen that someone else was using the same …
-
Hi Everyone,
Currently, I am working on my university project were, we have to transfer an image via Zigbee XBee Module S2C.
So, I am trying to use the Xmodem (https://xbplib.readthedocs.io/en/lat…
-
Please consider writing a ZiGate radio library that works with the zigpy library for Home Assistant:
https://github.com/zigpy/zigpy
zigpy is a is Zigbee protocol stack integration project that i…
Hedda updated
5 years ago
-
Investigate PC - Xbee1 - Xbee2 - Arduino baud rate.
9600 -> 115200
Some material that may help:
http://www.digi.com/support/forum/4787/using-the-xbee-at-115-200-baud-updated-16-march-2010
http:/…
-
#### Description
While testing arduino-zero+xbee to samr21-xpro communication during the testing phase of 2018.10 I noticed, that sometimes the initialization of the network interface fails. To check…
-
Hi, this is not really an issue but I was just wondering if there is a way to use this library with an Xbee 3g cellular in API mode.
Thank you.
-
Hi there—I'm working on a mobile app in React Native (using the Expo platform) that connects via Bluetooth to a radio module called an XBee. The XBee uses SRP to authenticate, but I'm unsure yet how e…
-
From pug398: "The vid:pid is 0403:6001 and bus device name is FT232R USB UART"
It works via a BT relay.
-
I'd like to start a discussion on how to back up the network key on XBee coordinators.
The issue is that on XBee devices the network key is write-only, so we have to remember it from the moment we se…