-
Hi,
I have an Aune S16. I'ts XMOS receiver appears to be the same as the Aune X1S which has support on the linux kernel:
lsusb gives the following:
lsusb -d 20b1:
Bus 001 Device 006: ID 20b1…
ghost updated
6 years ago
-
Hi
There was an request on the xcore about running 3000 taps @ 96 kHz on XMOS.
Since that could fit into an XMOS G4 with 90%burden + overhead i had to test a little.
Depending on how it is written …
-
Hi!
I wanted to ask, what are the specific USB drivers for audio and how to install them? Formerly I used USB output from Synology's Audio Station to Topping E30 DAC. I installed drivers from here bu…
-
When FS channel count set to zero, the remaining buffer size is too small and causes overflow on every USB packet. Size for HS/192 is 216 currently.
This is not normally seen because the FS/HS chan…
-
Firmware upgrade fails in erase step if end station is taking some time to erase its non-volatile memory:
```
$ upgrade upgrade.bin
Erasing image...
[NOTIFICATION] (RESPONSE_RECEIVED, 0x2297fffe8008…
-
Push upstream to be an official hardware port of TinyUSB (https://github.com/hathach/tinyusb).
In addition to the benefits of being an official supported MCU, this would no long require us to keep …
-
Would it be possible to get access to the source code for the firmware? I'm looking for a way to give weights to different angles and output the angle of the loudest sound (based on the weighted value…
-
Feature request from @xalbertoisorna
Add a way to specify an XN file which is not in the application directory. The motivation for this is to be able to have a single copy of an XN file which is used…
-
Quadrature encoder interface hasn't really been investigated yet.
-
Automatically run Black on python code (note, its is probably easier to delay this until the codebase is python 3.0)
xross updated
2 years ago