-
Hi,
First of all, thanks for your fantastic work! I've been struggeling with an issue for weeks now, so therefore my question. I've build a DIY soil moisture sensor connected to a CC2530 flashed w…
-
Hi Andrew,
There seems to be some inconsistency with temperature measurements. I've built 6 sensors and the range of reported temperature is about 8C under ambient. These are all lying side by side…
reven updated
2 years ago
-
I have piezometers at different points at the same site.I want to find there correlation among each other and also with rainfall.I want to do spatial Temporal correlation analysis.I am unable to find …
-
Please consider building and releasing a Z-Stack 3.0.x (Zigbee 3.0) firmware for CC2530 based EFEKTA Zigbee Plant Watering Sensor.
FYI, kirovilya from DIYRUZ community have backported Z-Stack 3.0 (…
-
Followed instructions for i2C on a RTD sensor on a raspberry pi 4 with the latest version of Raspian.
sudo python i2c.py or sudo python3 i2.py both give the following
Sensor is detected correc…
-
If i'm right, the name of a sensor/service will be defined by the class name.
Selecting the optional characteristic "Name" for a standard HAP service will not change anything. I find out, by attachin…
-
I have a Funhouse and a few Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensors. The Funhouse updated to CP 7.1.1 and circup-ed all the libraries. But the adafruit_seesaw.seesaw library is b…
-
Hello, I have installed the skin (v1.3.3) but I always get these errors:
> Jul 28 13:15:17 weewx[17] INFO weewx.manager: Added record 2022-07-28 13:15:00 CEST (1659006900) to daily summary in 'weew…
-
I thought it would be best to make a new thread, to keep things separated. The irrigation controller shows some weird behaviour after a reset. If a zone was running during shutdown with a remaining t…
-
The last few weeks we're running out of the space available for the sketch.
The test and dev builds now approach their max size so something has to change.
I think the sets of `normal`, `test` and…
TD-er updated
2 years ago