-
It sounds like Daniel has the RFID to Arduino communication functional. There are a myriad of outputs possible. A challenge will be constraining the many possibilities down to something that can be …
-
**Background:** FRC standard (legal) system with pneumatics requires PCM and PDU from https://www.ctr-electronics.com/. The system feedback is smart and toggles the compressor appropriate if everythi…
-
Support for the Ardbox and M-duino boards from Industrial Shields would be appreciated.
[Industrial Shields web page](https://www.industrialshields.com/)
-
Hello all,
I'm running a dragino LoRa Shield v1.4 on an Arduino Uno on 433 MHz.
Arduino reports me the following error:
FAILURE ...\radio.c:750
I have no clue, where to start from the debuggi…
-
```
What steps will reproduce the problem?
1. According the wiki, after I import the lib and upload the example, nothing
happend.
What is the expected output? What do you see instead?
I think the mi…
-
```
What steps will reproduce the problem?
1. According the wiki, after I import the lib and upload the example, nothing
happend.
What is the expected output? What do you see instead?
I think the mi…
-
I'm working on a project with ESP32-S2 and I noticed that the library doesn't allow using pins greater than 31.
Looking at the library, I noticed that the registers of these pins are not mapped.
…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
Bill
I have used Socket.io with the Ethernet shield connected to a GSM Router for outdoors connectivity. I had a issue with not detecting a re-connection because of the LAN network of the GSM Router. …
-
```
Running the example in the library I get the error: 'CAN' was not declared in
this scope. I installed the library by copying it in the Arduino/libraries
folder. Am I missing some required librar…