-
I have noticed the SimpleEVSE-Wifi defaults to 32A after a reboot even though I have set the MAX CURRENT in settings to 20A. THe webUI shows 32A and that settings is actually active.
This leads to a …
-
I have problem installing "EspExceptionDecoder", is there a way to decode this error?
```
Exception (28):
epc1=0x40106b49 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
ct…
-
Please fill the info fields, it helps to get you faster support ;)
if you have a stack dump decode it:
https://github.com/esp8266/Arduino/blob/master/doc/Troubleshooting/stack_dump.md
for bette…
-
I apologize, this question is a little off topic library. If he violates something, but you can help me, then delete it and let me know how I can get in touch with you.
I'm trying to work with the RC…
x8973 updated
6 years ago
-
### Hardware
Hardware: ESP-12E
Core Version: 2.3.0
### Description
When I run a sketch at 80Mhz all is OK 160Mhz brings in new issues.
I send out about 3000 bytes of data to serial with…
-
### Hardware:
Board: ESP32 VN Iot
Core Installation/update date: 15/May/2018
IDE name: Arduino IDE
Flash Frequency: 80Mhz
Upload Speed: 115200
### Description:
I try …
-
As i pushed Wiegand support, i realized the code structure so.. i realize we could improve it for everyone's good.
Honestly, i would love to make many changes. What do you think about following:
…
-
Hello ESP-Ardu community !
I´m working with the ESP 12-e for a while - after connecting the accesspoint as client the ESP resets:
Here comes the exit code:
```
void trigger(){ // T…
p1337 updated
6 years ago
-
Not an issue but I've been working on my own RFID system and i thought lets merge these projects. So heres some code to implement a timing system
The timing system makes it available so someone can…
-
Authors have the ability to specify the channel a radio/TV broadcast uses on a particular service, but there is no way to specify the over the air frequency (e.g. 107.5 MHz for a radio station or 66 M…