-
Hello !
I am trying to use a LED Display and an ESP32.
Display: [2727 SMD P5 64x32](https://www.aliexpress.com/item/SMD-2727-P5-outdoor-Video-wall-led-module-high-brightness-5500-nits-1-8-scan-6…
-
Hello ! I am back with some more questions:
As you may remember:
> I've soldered the wires for that default constructor and tried uploading some codes to the ESP32.
> Now, the board looked like…
-
Since most of the time, we don't need to go to the absolute maximum the [iCEbreaker](https://github.com/icebreaker-fpga/icebreaker) can give driving a HUB75 panel using @smunaut's [rgb-panel](https://…
-
Hello !
I'm trying to use a SMD 2727 P5 64x32 LED Display with the ESP32. I've opted for the following library https://github.com/NeoCat/ESP32-P3RGB64x32MatrixPanel
I've soldered the wires for t…
-
I have two sets of panels with the same label, P3-64x64-32S
One works, another one I see only colors.
I use "active-3" adapter on the first chain.
I have tried all possible combinations, but I hav…
-
Where can you get these boards from?
-
Howdy again, I tried your library to see if it would look better on video than SmartMatrix which is ok with the naked eye, but looks very flickery on video, see
https://community.pixelmatix.com/t/wor…
-
Hello,
I tried your demo and it works except that only red LEDs are working, no other colors. I has changed the pin assignments as I use a different wiring PCB from this project.(https://hackaday.io/…
-
I am currently trying to drive this panel: https://www.amazon.com/gp/product/B079JSKF21/, using a NodeMCU ESP-32S.
I've modified the latest (just grabbed from Github today) pattern_test and pixelti…
-
Dear Henner,
a few days ago I found matrixes 32x32 with 1:8 scan rate. I received one piece to try to use it but I have a big problem to print out complete information. Completely strange things sho…