-
## Current Behavior
The tx is set to 12 Full Mixed at 333 KHz. The rx (BETA FPV 5 CH PWM) is configured with the two channels at 333 Khz.
According the manual, I should have a PWM from 885us to …
-
Hello im having problems using the button
I tried every gpio on the board and in any ot them the push button works
now i set it to pin 34 and the other pin to gnd but nothing
i dont know if you ca…
-
### Is your feature request related to a problem? Please describe
There is currently no way for one preset to affect another, or for an optional portion of a preset to affect a later portion.
### …
-
I figured since CRSFJoystick uses the crsfSerial library this should be possble. Here's my attempt at getting this to work on an rp2040 based CRSFJoystick:
https://gist.github.com/countofkrakow/1e2…
-
while using verify_jwt_in_request()
this seems to be quite a pickle, i've seen #174 and #253 but even after removing flask-cors and implementing the workaround to get the entire post body this functi…
-
## Current Behavior
Using the new BFHDCOMPAT OSD mode with the DJI O3 Air Unit and DJI Goggles V2 set to HD display mode, the artificial horizon indicator and its sidebars at not centered, but are wa…
-
I just started with Yaapu on ETHOS, using it on OpenTX with no bigger issues (apart from a lot of lag on AP/CRSF combo).
But on ETHOS I noticed something interesting.
The GPS Coordinates data is n…
-
### Minimum requirements
- [X] Core clock speed is 48 MHz or faster?
- [X] Is the CPU an ARM Cortex M0+ or later?
- [X] Is the host microcontroller's UART peripheral able to support 420,000 (or highe…
-
### Describe the bug
If rx protocol SPEKTRUM is selected in Firmware Flasher for 4.5.0 RC3 I get the following compile error
`In file included from ./src/main/pg/rx.c:29:
./src/main/pg/rx.c: In f…
-
Hello Mstrens,
Firstly, many thanks for your great work.
I have already set up 3 sensors with Vario and GPS, they all work perfectly. Now I am trying to integrate a Hobbywing Fly Fun V5 ESC into a v…