-
I've successfully extracted and decrypted the m0800 module from P3X firmware bins, but don't see an equivalent module in P3S or P3S firmware bins.
Can I simply use the u-boot, ulmage and ubl_297m_1…
-
### Is your feature request related to a problem? Please describe.
One of the biggest factors that causes bed mesh changes is the temperature of the bed, which leads to increasing amounts of warping …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Background:
The goal was to integrate the MAX31865 RTD-to-Digital converter module with the …
-
Hi Guys
Generally I use a manual 4 corner bed level on my 3d printers as I feel I can get a better level given my beds at 420 x 420mm are usually larger than the average printer. Also because I usu…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
FT_MOTION on a CoreXY printer with A and B motors, and 4 Z-Steppers. When FT_MOTION is enable…
-
**Is your feature request related to a problem? Please describe.**
UBL usually uses a 10x10 grid, so it takes a long time to probe when using the `G29 P1`.
Because of that i mainly use `G29 J5`. but…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
After setting MILLISECONDS_PREHEAT_TIME to any positive value the temperature.cpp check…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
After flashing Marlin to the board, and having EEPROM_INIT_NOW as well as ONE_CLICK_PRINT ena…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When printing at a higher speed with highish linear advance (k1.57, direct drive) and h…
-
### Description
Probing corners using UBL "L Corner"
### Steps to reproduce
1. Update TFT35 Firmware with bin.
2. Go to L corners via Movement -> Bed Level -> UBL -> L Corner.
3. Select …