-
Issue #228 describes how the Tx power metadata can be modified (in a not necessarily fully deliberate way, there is some randomness involved).
The new [`cwa-risk-assessment.md`](https://github.com/…
-
It looks very interesting. Could you please link to references for the YouTube info structures?
-
Is it possible to add 3x and 4x options to Vertical Reduction?
73 de K4RCG
Bob
K4RCG updated
4 years ago
-
Hey Mark,
I read with interest in your blog article;
_Improve Temperature Stability
It’s easy to improve the temperature stability of your LoRa systems_\
I am trying to optimise my RFM96 lora de…
-
mt76x0u driver stop working after a while, running under heavy load.
Discovered on kernel 5.4.51 and kernel 5.7.9 and AMD, INTEL and Raspberry Pi
Test devices:
Bus 003 Device 003: ID 0b05:17d1 ASUS…
-
I flashed Betaflight 4.2 RC2 on a HGLRCF411 FC. I flashed JazzMaverick 16.77 24khz ESCs.
Everything runs great right out of the box, untill I installed a buzzer/LEDs today.
When I turn on the LEDs…
-
Hi, Xianjun
I have zynq706-fmcomms3. It is working well as AP
But the running time is 2 hours only, because of the Viterbi license as your below comment.
("Note 2: After ~2 hours, the Viterbi de…
-
Hi Kurt,
Although entering my 70 cm RTL tuner frequency the calculation is not made. I have to enter the LNB_CRYSTAL frequency in qo100websdr.h to get the transponder visual and when i click in the…
-
Occasionally a light (mostly a Tradfri GU10) gets unavailable in the Phoscon app and can not be switched off/on via Phoscon (or HASS). Using deCONZ 2.05.55 and firmware 262F0500 on the Conbee now, but…
-
Hello all,
I am trying to get the new Icom IC-9700 doppler control work but I get erratic control.
I did try to use the IC-910 driver from hamlib-w32-3.3 by changing the CIV adress to my IC-9700…