-
The message they sent you was:
thanks for your great work
trying your examples
i had found one bug later
in control section for irremote please add this line for correct act for IRremte
>>
sw…
-
### Version/revison of the library used
v2.6.0
### Expected behavior
Fujitsu air conditioner switch ON if use TurnOnFujitsuAC example
### Actual behavior
Fujitsu air conditioner doesn't switc…
-
Dear Sir,
So far I can set the temperature, fan speed, mode and turn it on, but I have never managed to switch Samsung AC off.
Please kindly advice how to switch it off?
### Version/revison…
-
@cyborg5
Hi,
I am the current maintainer of Arduino-IRremote and would be interested in merging efforts between the two repositories. Please check all the links below as well.
Links:
https://gith…
-
i installed tasmota 6.1.1 on one of my nodemcu, as they have enough exploited i/o pins.
connected an IR receiver to D2 and an IR transmitter to D4, and set IrSend and IrReceive accordingly.
all see…
-
Hi Pablo,
I have a Wemos D1 mini and trying to use your code.
Did you use the schematic as described in this page?
https://www.analysir.com/blog/2017/01/29/updated-esp8266-nodemcu-backdoor-u…
-
Hi,
I'm having some weird problems while trying to send out a remote code.
I'm using the itsybitsy M4 express.
I have used two configurations to set up the header:
1) This produces an output s…
-
### Hardware:
Board: DOIT ESP32 DEVKIT V1
Core Installation/update date: 17/November/2017
IDE name: VisualStudio 2017 with visualMicro
Flash Frequency: 80Mhz
Upload Speed: 9…
-
When i "read" the code from the Hitachi Tv remote i seem to get different codes from the power button:
12:40:09 | C60BDB3D | UNKNOWN | 4 | 0x0
12:40:09 | 84071B38 | UNKNOWN | 6 | 0x0
12:40:04 | D…
-
Thanks！