-
I thought there was already an issue for this, but I can't find it now :(
- I've done some basic testing to look at SI when Kasli is used with long EEM cables.
- Part of the idea here was to inves…
-
In #461 there was discussion of adding an Ethernet-to-serial interface to a temperature controller EEM (https://github.com/m-labs/sinara/wiki/Thermostat) proposed by @hartytp. Presently there are 2 EE…
-
- [x] Channel-to-channel cross-talk: adjacent channels, with agressor, victim switches opened and switches closed and with attenuators at max/min
- [x] Output phase noise/amplitude noise (0.1 Hz - 10…
-
-
-
The hardware development contract funds two rounds of prototype hardware. Each prototype round will generate two copies of the prototype hardware consisting of the following parts. The list reflects t…
-
What is the current thinking on putting hard cores on the Metlino/Sayma/etc.?
-
After hours to days (depending on the board) the Sayma loses its 1.8V power supply until 12V is cycled. Happens on all 3 boards we have at m-labs, less frequently on sayma3 than on the other two. Seem…
-
Summary of conversation:
- [ ] DNP Sayma ADCs and all components they are using (regs, SMPs, etc, etc)
- [ ] Make sure we have enough IO on the AFE digital mezzanine to run a 1MSPS SPI ADC over the …
-
@gkasprow WUT starts using github as your primary repository for layout, routing, modeling, etc. This replaces use of private WUT git repository.