-
```
Hi,
I've fixed & added this to stm32flash:
* new reset code common for Cortex-M0, Cortex-M3, Cortex-M4(untested)
* support for STM32F3(untested) and STM32F0 family
* new option -o for erase on…
-
```
Hi,
I've fixed & added this to stm32flash:
* new reset code common for Cortex-M0, Cortex-M3, Cortex-M4(untested)
* support for STM32F3(untested) and STM32F0 family
* new option -o for erase on…
-
The bootloader client should discard extended CAN frames.
Otherwise it won't work with uavcan traffic during flashing.
-
Hello,
I did not manage to find the issue with the first led and the dma driver for the led strip , do you have any idea of what can be wrong . I tried all pwm configuration and timing , and for all …
-
The LED strip doesn't work on the Sparky when light_ws2811strip_stm32f30x.c is compiled with the normal optimization level. If the file is compiled with DEBUG=GDB (with all other files compiled norma…
hydra updated
9 years ago
-
Looks to be the related code is not properly working? If executed the target will make an normal reboot without activating the bootloader. This will be the first step to be able to flash the device in…
MJ666 updated
9 years ago
-
The Arduino IDE made some major changes to the IDE file structure in version 1.6.2 which cause it to not work with this repo
At the moment I suggest that everyone stay with 1.6.1 as this is known to …
-
We need to separate platform specific from reusable code. See #22. The rationale is that we will reuse the bootloader for various boards, not only motor controller.
My suggestion is to place all boa…
-
This problem is caused by USART_Init disabling USART on STM32F3 (but keeping it enabled on STM32F10x).
`USART_Cmd(s->USARTx, ENABLE);` should help ...
https://github.com/cleanflight/cleanflight/blo…
-
microduino board identifier is `nano`. There is no issue with Arduino IDE, but `nano` name is shared with Arduino Nano board.
Month ago I released [cuwire](http://apla.github.io/cuwire/) — IDE for mi…