-
There are things that make it challenging to design a UI which is easy on new users, but flexible for experienced users. We need ideas.
Let's start with a big challenge: there's a many-to-many relati…
-
Hi,
I use a GRBL Controlled mini CNC mill purchased from Aliexpress.
It came with GRBL and Candle software 0.9
I'm facing problems with the candle software
1. candle 0.9 software simulation freez…
-
Hi,
I use the last version of GRBL for a Laser engraver.
The setup is:
Arduino Uno
CNC shield
DRV8825 drivers set for 16 microsteps
Laser driver connected to Z max
When the code is with G0 the movem…
-
I'm trying to make a 2 axis laser engraver. I've read all of the old post on this issue but cant seem to figure out how to get grbl to forget the z axis. I've tried all the recommended code changes co…
-
Just like most comment here this is not an issue but I like to get some input and give some feedback.
To play around a little bit I did mount a 2W blue laser+MOSFET to my ShapeOko+grbl and it is work…
-
Hi
Does your DK-8 have an Arduino on the rear? I have a DK-5 which doesn't, and have been trying to get this to work (using the USB of a Raspberry Pi). I get the menu up, but most of the buttons fail…
-
I have read through a lot of posts regarding homing issues, and I'm quite confident that GRBL handles homing perfectly. Unfortunately, not in my case. I have a set-up for a laser engraver (X and Y axi…
-
Curious what the lasercutter setting in the machine configuration does. I am currently running a version of GRBL that is optimized for laser engravers. The version of GRBL I am running removes the pau…
tklus updated
8 years ago
-
This GCODE is output from Fusion360's LASER/PLASMA/WATERJET CAM. Loads just fine in UGS but wil not load in Laserweb3. No Error output is given to console.
[DONT_PANIC.zip](https://github.com/openh…
-
Looking at the code for the Processing Array, I see the following single-block processing machines are not supported (yet), and in most cases it's not clear why:
- Amplifabricator (maybe because PA su…