-
### Bug Description
As of recently Marlin does not compile with ESP3D_WIFISUPPORT defined in Configuration_adv.h; upon failure it prints the message `fatal error: ESPAsyncTCP.h: No such file or dir…
-
**Describe the problem you have/What new integration you would like**
I want to display degree symbol on MAX7219 7-segment display but seems like it's not on the character list.
**Please des…
-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…
-
## Current Behaviour
Exporting the breadboard view of sketch to svg image does not match the actual Fritzing Breadboard view very well. Exporting to a png image handles all of this correctly. I a…
-
Follow-up for #67
cc: @hippyau
- [x] Change https://github.com/vanvught/rpidmx512/blob/master/lib-remoteconfig/src/remoteconfig.cpp#L101
- [x] Change nuc-i5:~/uboot-spi/u-boot$ grep CONFIG_BOOTC…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
Raspberry pi3 B+ with max7219/luma seven segment display controlled via SPI.
I have 4 Digits with for buttons to get numbers 0-9999, pressing a button under each digit increases it by 1 and update…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
A number of people have suggested having an RTOS (Real Time Operating System) under the Marlin firmware would help in a number of ways. We would be able to isolate some functionality into separate …
-
### STM32F407
Infinite loop before `main()` if `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is enabled.
### Steps to Reproduce
if `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is enable…