-
The stereo audio injector seems to be causing some interference somewhere whilst I am trying to read the output of my two mcp3008 chips. they are both connected via software using the adafruit driver,…
-
### Versions
* Python: 3.6.6 and 2.7.15
* OS: archlinux raspbian and ubuntu
* Kivy: commit -> a95212d647528c2cc5ee95ff44616fb4029043c8
* Kivy installation method: https://kivy.org/docs/inst…
-
Hello again @hzeller !
I decided to continue my project with other panels than the ones i bought in china.
Im running a the program on 22 32x64 p5 panels with a raspberry 4 with adafruit bonnet wi…
-
I am new to UPS PIco world. I just received 2 boards from PiModules (UPS PIco HV3.0B+ HAT Stack 450 PoE). Took a while to get them up and running. I've been making up circuits since my teenage year…
-
The documentation state PI 5 is supported, however PI 5 hardware changes appear to require libgpiod rather then pigpio.
https://github.com/benkuper/Chataigne/issues/214
Sep 20 10:13:16 rowingmon…
-
I have built a single band RPi WSPR shield which is successfully transmitting. I would like to design a multi band shield, where each band is generated by a different GPIO pin. How many distinct pins …
-
Without sudo I get on Rapsberry Pi 3b+ an error like this:
Can't open /dev/mem: Operation not permitted.
Any safe solutions?
Thanks!
-
hi, i am using an rpi4 and a 64x64 matrix. i used to be running Raspbian lite and everything was good. then i decided to switch to dietpi since it was lightweight. i installed the repo but when i run …
-
IMHO there should be a feature (i.e. built into the overlay 'data' itself, rather than just included in the 'markdown' part) for boards that "uses_i2c" to include the i2c address(es) the board uses. W…
lurch updated
3 years ago
-
Thanks so the touch seems to work I can see the console for a second before gui but stuck at black screen with _