-
Scientific notation in generated GCODE generates an error in GRBL. This in turn causes the LW3 communications to lockup and in my case leaves the laser in an unsafe state (stalled and still firing la…
-
Hi all,
just builded a Laser Cutter / Engraver. Standard setup Arduino UNO / CNC Shield / Pololu A4988.
Everything is fine but the engraving with varying "Spindle Speed" or better varying Laser inten…
-
What does "B:EnableAE2Integration_false=false" mean in GregTech\Other.cfg? That var looks weird :D For AE2 intergration I just should set true instead of second false, I guess?
-
This is a rather quirky issue. I'm using grblControl to control my home built laser engraver. When I create gcode with the extension that comes built in with Inkscape, everything works great (except I…
-
Hi,
When I load my design from laser engraver extension. At speed 60 in grbl controller, the design looks good. But after my engraving is off at some points 1cm too left or too right. I reworked my de…
-
Hi, I'm newbie so sorry for immature question and poor English.
My laser cutter bought from Aliexpress, like this and I rewrote a 0.9j FW.
http://goo.gl/yf3pFi
I wrote a 5cm diameter circle with In…
-
I have an Emblaser laser cutter/engraver from Darkly Labs.
I connect to the laser over the serial port. Then I home it and while it is homing (takes 4-5 seconds) UGC will close the connection. This d…
-
_From @RoDuth on December 20, 2015 6:20_
Have been using printed labels for some time now and are looking to go to engraved plastic labels very soon. I have been speaking to the local engravers and …
-
Awesome !! Now I have the GRBL flashed and works like a charm controlling my X,Y axis on my mugbot/painter like I want.
Now I need to make it control a simple standard servo for the penlift "http://…
-
Hi! runtime machine suddenly starts to move is not on the program. often moves Y to zero, and then returns and continues. There are cases when the machine just changes the position where the back and…
Jo937 updated
8 years ago