-
currently they're only accessible with the hardware
-
it would be great to have midi control over things like aux fx send/return volume, fx parameters, input/output volume, and such. right now, it seems the only things that can have CCs assigned are a fe…
-
input control should be a gain (attenuate only?) pre-engine input.
-
because norns uses alsa raw open (snd_rawmidi_open) the dependency on monitor is to /dev/snd/midiCxDx.
there is no requirement in monitor to check that this is a usb subsystem for alsa to work.
so…
-
What's the correct usage of `midi_device:reconnect(value)` ?
I seem to get errors whenever I'm trying to use this tied to a param callback with value 1 to 4. Not sure if I'm just using it wrong or …
-
currently the docs are getting generated manually and are unsurprisingly laggy.
(see #…
-
Working through build instructions [here](https://github.com/monome/norns/blob/master/readme-setup.md) and this repository is not working.
(first issue report - sorry if in wrong place or if I'm mi…
-
seen a few times, can't reproduce reliably
seems sometimes norns boots up with HP still zeroed out, meaning the i2c send failed. why?
-
(that's the symptom anyway; hot-plugging may be a red herring)
what i did:
1. norns was on
2. wifi not setup
3. plugged in a nubbin
4. navigated to system meu
5. wifi reads "stopped"
6. nav…
-
If you run `apt-get update && apt-get upgrade` on your norns it will hose the custom kernel and related things that are required to drive the norns hardware (including the usb ports, and therefore wif…