-
For an [odour stimulator project](https://github.com/Sussex-Neuroscience/odour-stimulator), I created a board that delivers a "spike and hold" signal. This was based on the [schematic](https://www.the…
-
EU version uses [77DE-06-09](https://www.idealpower.co.uk/wp-content/uploads/2017/07/ideal-power-9v-ac-0.67a-euro-psu-77de-06-09-a1.pdf), 9V, 10W supply.
US version uses [WAU12-200](https://catalog.t…
-
Had this sensor for long time working great on my custom made prusa clone and now I'm building a new corexy printer around SKR 1.4 Turbo board on 24V.
I'm not a electronics engineer but I can find …
-
I am wondering if someone can help me out. I built the expander for my Plinky, but it is not lighting up at all, and not being recognized over USB. Looks like it might not be getting power, but I have…
-
With XL set to E131... Updated to V27 firmware and with both F16V4 and F48V4NS - reuploaded inputs/outputs -- the controllers would not successfully send test pixel data to smart receiver chains por…
-
We should remake the wiring diagrams as png files so that they can be shown in-browser and embedded in a page. I think we should probably make new diagrams rather than just converting the PDF so we c…
-
Hi,
I've been able to compile and upload the code to CoopCommand and CoopCam. When I plug in power (12V) the LCD lits up for 2 seconds and then goes black. Is there a way to test the CoopCommand a…
-
The display works well at first start, but bug after a reset or restart without power failure of several seconds.
**Screenshot of the display that works:**
![lcd-ok-mini](https://user-images.githubu…
-
Hi all,please help me connect my 15w laser to CNC 3018
Sorry for my English :)
My board is woodpecker 3.2 updated to 1.1f,Software laser grbl.
My laser:
Output wavelength: 445nm~450nm
Output Powe…
-
I have a question, do you think it’s possible to add support for more versions of the Arilux controller?
Also I think these are the same as the Magic Home controllers?
Here’s the version specific in…