-
Have been using printed labels for some time now and are looking to go to engraved plastic labels very soon. I have been speaking to the local engravers and would prefer to be able to use the reporti…
-
Hi! runtime machine suddenly starts to move is not on the program. often moves Y to zero, and then returns and continues. There are cases when the machine just changes the position where the back and…
Jo937 updated
8 years ago
-
We need to prevent refresh page if isconnected
-
The LaseWeb software appears to hang when trying to connect to Laser Cutter/Engraver serial port. It jus sits there, have waited as long as 1/2 to connect but no success.
-
I'm starting to think about how to better organize the UGS back end so that the front end can be expanded and/or rewritten without becoming more of a mess. Most likely there will be a bunch of individ…
-
I'm currently using grbl 0.9j, which gets detected correctly in the gui.
When I try to laser a path extracted from a SVG-File, LaserWeb does not use M3 / M5 to enable or disable the laser but moves th…
-
A large number of K40 users could benefit from LaserWeb, but as you are aware the K40's do not follow the CNC standard of 0,0 being in the bottom left corner, for the K40's it is the top left corner. …
-
As I want to use MK for Laser CNC Engraver/Cutter, I don't need the extruder stepper driver or extruder heater.
I need to configure like that:
X & E0 => dual X drivers
Y & E1 => Dual Y drivers
Z => Si…
-
1. Support circular beds
2. Initial move after homing needs to be fast rate not slow rate (deltas have a long way to move).
https://github.com/Smoothieware/Smoothieware/blob/edge/src/modules/tools/…
-
You need the diamond saw to start of with ProjectRed transportation. Currently this needs a flawless diamond (or better) which needs to be produced in the precicion laser engraver.
Is it intended to …