-
I've been running the Re-arm board for a couple of days now and it's been frustrating. I have been getting random disconnect's which require me to diconnect my host and then reconnect again. This does…
-
### Bug Description
At the end of each print from SD card, printer seems to software crash.
Printer: Anycubic Kossel Linear Plus
Electronics: Stock parts, Trigorilla 1.1 board
FW: Marlin 2.0 w…
-
Hi,
trying to configure offset values for following configuration
at a cartesian printer and came to varying ZProbing positions:
This should be the final setup
X to the right, Y up, Tool1 is at …
-
### Description
When testing the latest compile of Marlin 2.0.x (5/23/2018 in this case) I'm getting motor stutters that I wasn't getting from my 2.0.x 3/19/2018 compile.
### Configuration
- …
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…
-
#### What were you doing?
I recently had my connected old-windows machine that I used to use for printing on my Rostock Max V3 via Simplify3D die ... instead of replacing it, I decided it w…
-
Bug Description
When using linear advance on my bowden system, no matter what value, even between 0 and 5, there is a big drop of plastic at the point where the speed changes, even tho the 3 segmen…
-
I tried to print the parts once after another. But at some layers there are some wired moves and all parts at once visible.
CURA 4.3.0
Windows 10 64Bit
"Artillery Sidewinder X1"
I can't attach…
-
Both the Marlin 1.1 and 1.1.1 on my Kossel starts the printer "prime" sequence, and on the 2nd of the 3 passes, it completely shuts down the MEGA so it's completely unresponsive without a power cycle.…
-
### Bug Description
When executing G02/G03 commands (curves with X, Y, I and J variables) the machine (homebrew Pen Plotter) has speed issues slowing down, and speeding up beyond the max set accele…