-
I am trying to load the actual sd image into a virtual machine. I hope to run it as a VM on my x64 laptop for familiarization.
I have the red-pitaya-ecosystem-0.95-debian-8.6-armhf-20161219.img bu…
-
I've been trying to follow the steps in "LED blinker", but I can't make the SD card. I suspect the process requires the SD card to have a certain configuration at the start, but I can't work it out.
…
-
Hello,
I've dd-ed the red-pitaya-wspr-debian-8.6-armhf-20161219.img to a SD-Card.
Logging in via ssh to the red-pitaya works.
WSPR-receptions works too very well..
But transmission doesn't.
I h…
-
Hi Pavel!
I have been working with the Red Pitaya for a few weeks now and pretty much everything works great now. Thanks for all the work you have done!
But one thing seems to be off:
The ADC i…
-
Hi pavel, i see that you add a new project based in an implementation of a Radar. I recreate a this project and executed the server application in a Red Pitaya. I have not see any values in the consol…
-
Which kernel related parameters should be passed to qemu to boot the pre build images please?
The image partition 1 contains:-
boot.bin
devicetree.dtb
uEnv.txt
uImage
$ file boot.bin devicet…
-
Pavel,
I've hooked up the WM8731 development board to try out the CODEC. I have receive Audio but no TX power. I've tried to get SSB transmit power through using the VAC as well as through the CODE…
-
Hi!
So I have built my custom ADC triggering/recording unit upon your sources, which are awesome!
Sadly I don't always fully understand everything since it's very loosely documented :)
I have all…
-
... would be very nice.
Concept for FPGA:
- remove 1 PID
- replace by new red_pitaya_trigger_module
- trigger module has input and output like any dsp signal and furthermore registers
- thres…
-
Hi Pavel
Firstly I just want to thank you for a great project. I'm trying to build your embedded transceiver from source. I have the development machine setup with Vivado 2016.3 and everything com…