-
# A - Description
The RC Adjustements in flight can't be used, at least for some kind of switch. I have a FlySky FS-i6S TX, and I use the VrA and VrB wheels to change the P and D values.
In CF 1.x…
-
# A - Description
The fact that 2.1.0 disables GPS for all boards with 256kB flash is missing from release notes, GPS configuration docs, etc.
The release info only mentions NAZE32 and "older t…
-
using latest bf 3.2.0 master on airbot f4 and revolt but hott telemetry is not working ... going back to bf 3.1.7 and hott telemetry is working well
ghost updated
7 years ago
-
Hi
It seem that there is no more "info" button to show the PIDs and rates configured on the examined log.
(I think it was called user settings)
I have also noticed the logo is now cleanflight for…
-
Hardware control, RGB led WS2811b / WS2812
0. In flight modes there is an LEDLOW position - which completely shuts off all LEDs. Would it still be worth mentioning in the leds bar configuration tab…
-
Hello,
One week ago, I soldered my rx to uart 3 because it takes less space and I had no problem. I hovered to test if everything was good and I had no issues.
But today, I wanted to fly again…
-
Here seems to be new chips used in the latest SPRACING F3+ODS chips I have tried BetaFlight, and CleanFlight and they seem to be working but in Inav it does not seem to be covered.
Things I have no…
-
Hi,
My quad configuration is an old CC3D with FS-R6B Receiver that have 6Ch via PWM.
From the first moment I had problems with the receiver. The channels were changed and some did not arrive. Af…
-
Hello there:
The cleanflight configurator V2.1.0-RC1 has a problem. Cause After updating the firmware v2.1.0-RC1, use the cleanflight configurator V2.1.0-RC1. Can not make the settings. Jump dir…
-
This is to control example immersionrc tramp vtx from FC( extended to example control vtx from Taranis )
https://github.com/betaflight/betaflight/pull/2106
https://github.com/betaflight/betaflight…