-
How is the "orient" defined in a practical sense in "plus_mul"? Clockwise or counterclockwise? Which direction of edge block and corner block is 0,1,2?
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
Im trying to set up a Bed Distance Sensor on a CORE XY with independent, sensorless homing Zs. Once …
-
Real quick summary: (I'll post more about it later)
there are issues having the firmware flash for G32 and N32 boards. it compiled OK, but sometimes they do not flash well, and get stuck on loading…
-
Just power off both heater and bed :(((
Two different (mirrored) pcs at the same heigh.
Hardware: DUE+RAMPS-FD+LV8729 (XY) 8825 (Z+E)
Repetier, Marlin 2.0 works well
`/**
* MK4duo Firm…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I have a 7x7 Mesh Grid size in my custom configuration.h for UBL. I attached the complete zip.
…
Abasz updated
7 months ago
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
Ok, I downloaded what I THINK is the correct version and Fashed it.
"Aquila_GD32_BLT-5x5-NoPro-MPC…
-
The speed of the AsyncFetcher appears to be limited by the speed of the GIL (i.e. a single CPU core is being pinned at 100% when the fetcher makes calls), which could be resolved by [this solution](ht…
-
I run a SKR 1.4 Turbo with TFT35 E3 V3
Since I probe for Z G34 sequence do all what he had to do, but doesn't compensate. Just do movemnet, probe and report...
When I use endstop for Z everything…
-
I am getting the same issue with the `glob` import being undefined for `streamdeck bundle` and `streamdeck link`:
```
mmanciop@Micheles-Air dialcommand-streamdeck-plugin % npx streamdeck bundle --…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
"Auto Build Mesh" should check all mesh points, but actually stays in the first position position, …