-
Hallo TomMajor,
dem Kommentarblock entnehme ich ähnliche Werte, wie ich sie bei mir gemessen hatte.
https://github.com/TomMajor/AskSinPP_Examples/blob/b81944e1d8883367090fad9beb27f845727a4837/HB…
-
hi!
i got your sensor running with a raspberry pi and after a lot of research and tries i got very good readings.. my raspberry pi code:
```
#!/usr/bin/python
#https://github.com/adafruit/Adafruit-…
krikk updated
5 years ago
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
This issue lists the status of all tests for the [Release Candidate 2 of the 2018.10](https://github.com/RIOT-OS/RIOT/releases/tag/2018.10-RC2) release.
Specs tested:
- [x] [01-ci](https://github.…
-
**Actual Behaviour**
The existing layout is,
![screenshot from 2018-05-20 05-58-00](https://user-images.githubusercontent.com/17523141/40274376-daef7528-5bf2-11e8-9648-6d2b2b17c980.png)
This …
-
after update from var. 5.12 to 6.1.1b through Arduino IDE the temp from sensor (GPIO14) not Not displayed , not even zero.
i did choose from setting the right sensor type.
-
I am using H801 analogue PWM outputs (thanks to tasmota) successfully for quite some time now.
As there is one user configurable gpio (GPIO00) i tried to configure & use it as ws2812 digital data li…
-
**Describe the bug**
I'm trying to flash my Sonoff RF-Bridge with OpenMQTTGateway. I enabled the IR Features following this page: https://1technophile.blogspot.com/2018/02/adding-infrared-emitter-to-…
-
Mal eine Fragee zum Helligkeitssensor er funktioniert an sich gut. Zwischen 7 un 9 Uhr Morgens steigt er aus und sendet nichts mehr und gegen 16 - 18 Uhr sendet er wieder Daten dazwischen immer keine …
-
I configured 2 switches: switch4 and switch5.
Switch4 is sending the right MQTT message:
`15:15:36 MQT: cmnd/sonoff_test1/POWER4 = ON`
but Switch5, 6, 7 are sending by identical configuration to …