-
on the 16 ch expander if elrs/crsf receiver is feeding seam to not get last 2 channel 15-16, if i switch elrs receiver to output sbus 16 work
can it be in the oxs code somewhere?
-
### Describe the bug
As far as I know the token expiry should be extended but not the token itself shouldn't be changed on new request. Currently this makes requests with htmx fails as after the fi…
-
### Describe the bug
The AOCODARCF722MINIV2 I use does not have OSD function in the 4.5.0 firmware downloaded online from the ground station, but the 4.4.3 firmware downloaded online from the ground …
-
### Describe the bug
Building for MATEKH743 fails on macOS
```
betaflight % make configs
make: Circular configs ./obj/main/STM32H743/.efhash_818b631372f10ad09e29463180b1c7d7
%% startup_stm32h7…
-
Hi, awesome project! Do you plan to add more buttons? Multiple buttons can be mapped on a single channel using different pwm values.
I made a XIAO carrier board, could this be added to your support…
-
## Current Behavior
Not able to get RPM telemetry (2 wire) eg Hobbywing RPM sensor to the transmitter and OSD from ESC with no telemetry.
## Desired Behavior
To be able to use eg, Hobbywing RPM s…
-
### Describe the bug
Motor protocol error in 4.5 using dshot300; I disabled and rebooted, same error. reflashed 4.5, same error. Not until I reflashed down to 4.3 did I get the flag to go away. I did…
-
## Current Behavior
I am in the process of upgrading a Matek H743-WING V2 Flight Controller + XF Nano Diversity setup from INAV 3.0 to INAV 5.1 and am running into an issue. When I arm and disarm th…
-
### Describe the bug
Fc: OMNIBUSF4SD
Rx: radiomaster R161
Radio: Tx16s
The radio will connect to the quad but Bf4.5.0 RC2 doesn't see my stick inputs. Downgrading the firmware back to 4.4 solv…
-
### Describe the bug
Drone fell out of the sky as if a motor or esc died. I disarmed before hitting the ground, Once i got near the drone it did not arm when i tried.
O3 air unit kept recording unti…