-
**Application Version**
4.0
**Platform**
Windows 10 x64
**Printer**
Cr-10s
**Steps to Reproduce**
Use a preconfigured dual extrusion profile on a single extrusion machine
**Actual Resu…
-
### Bug Description
The pin on my original bltouch 3.1 isnt deploying when trying to abl from the print menu. But the pin does deploy and retract in an auto test when powering on as well as sending…
-
### Version
1.42.0-beta2+win64+full-201904140830
### Operating system type + version
Windows 10 64bit
### 3D printer brand / version + firmware version (if known)
Prusa Original MK3s
### B…
-
### Description
X-axis TMC2130 driver randomly disconnects/fails in the middle of the leveling routine. The bug is always on the X-axis, even after swapping driver boards around.
### Steps…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
I've recently gotten a bunch of tickets (see foosel/OctoPrint#2285 and foosel/OctoPrint#2291) that hint at the firmware ("3.0.12 w/ linear advance" and 3.1.1 RC1 (?)) sending out resend requests witho…
-
### Description
We build a test fixture for our printers which puts a 78.5 ohm resistor across the thermistor inputs to test MAX_TEMP. It works fine for the hot ends, but for the heated bed I am ab…
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…
-
As I had a spare MKS SBASE, I decided to give it a try and replaced the RE-ARM/RAMPS from my printer. I also gave a try to some options I did not really test till now. With the SBASE, I got a more sta…
-
### Description
Hello everyone - I am submitting this as a bug because I truly do believe it is a marlin-specific bug. At our shop, we are currently dealing with a number of large-bed printers. We …