-
The location of GAR2RNX should be defined by a tag in the configuration XML file, so it can easily be changed. The parameters should be defined also in the XML. The output should be sent to the a pip…
-
Hi,
I am working with v0.1 of bladeGPS rather than v0.2 because of #13.
I have edited the brdc (it was originally from 2016-05-31) to have today's date in it (2016-07-26). I am running with the foll…
-
There are some signal code definitions which are incorrect or useless.
- `CODE_L1E` is declared for L1-SAIF (QZS) but it's not used in sources and correct code for this signal is 1Z (RINEX 3.03 specs)…
-
- http://smartnet-ru.com/zona-pokrytija-seti_665.htm
- http://geodetika.ru/site/bazovye-stantsii/
- https://hive.geosystems.aero/rinex
-
We are using the RTKlib 2.4.2 source code in a project and having problems converting what appears to me me to be valid RTCM 1004 message content into a RINEX file. The call to convrnx() has worked we…
-
Hi
I recently upgrade my M8N with the new firmware 3.01. If it works on U-center , It seems that RTKLIB does not reconize the GPS anymore.
Worked fine with Firmware 2.01 of Ublox .
I came then back …
-
Hello
Why RTK (Kinematic) doesn't work when the time is not checked in RTKNAVI configurations (It provided single position solutions) ?
Ebi10 updated
8 years ago
-
I believe "multi_constellation_settings.m" has been removed from goGPS at some point. The function is still [called](https://github.com/goGPS-Project/goGPS_MATLAB/blob/ad2106db710cbd22e2f01b7e8fc0891…
-
git checkout rtklib_2.4.3
...
LANG=C ./makeall.sh
```
% pos2kml/gcc
cc -c -Wall -O3 -ansi -pedantic -I../../../src -DTRACE ../pos2kml.c
cc -c -Wall -O3 -ansi -pedantic -I../../../src -DTRACE ../../.…
ghost updated
8 years ago
-
Hello,
as you know RTCM 3.1 stream can contain only one type of GPS L2 code: L2P or L2C, and L2C has priority.
I use RTCM 3.1 stream for making RINEX 2.11.
If my receiver trackes only GPS L2P CONVBIN…