-
The instructions say to invert the FIL_RUNOUT_INVERTING = TRUE. But that's no longer supported and only FIL_RUNOUT_STATE Low/High is supported.
I've tried both high and low, and whenever I start…
-
Using CM4 /w M5P having troubles configuring cameras and displays at the same time. Even with the known issue with Klipperscreen & the cam interface at the same time I tried to work around it but ther…
-
product : delta
mainboard : btt skr2 (chip : STM32F429VGT6)
klipper : lastest
bdsensor: lastest
bdsensor is connected
When you issue the following command, the result is as follows:
m102 s…
-
### Description
### Steps to reproduce
1. [First Step]
2. [Second Step]
3. [and so on...]
**Expected behavior**
to resume after power loss
**Actual behavior**
go to the point of…
-
The [3d model file](https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/raw/master/hardware/BTT%20SKR%20MINI%20E3%20V2.0/3D/BTT%20SKR%20MINI%20E3%20V2.0.step) provided for SKR mini E3 v2.0 does not…
riaqn updated
9 months ago
-
Wondering if I can use this method with a Artillery Genius Pro? I assume there are a lot of similarities to the X1?
-
It would be good to know the max current you can draw from each port and especially the onboard voltages
For example:
1. Maximum current that can be drawn from all combined 12V ports that are fed fr…
-
I love the mac style gesture, and they all work fine with system gesture, like swipe to switch workspace. I'm using BetterTouchTool now, unfortunately, the BTT gesture conflicts with two finger swipe …
-
### Check Existing Issues
- [X] I have checked existing issues, and this issue is not a duplicate
### Description
The hidden menu bar used to be only as wide as needed to fit the hidden items. Now …
-
we need schematic files for this board to be open source. please upload this.