-
I need help. I compiled firmware and when I tried to flash nothing happened. I realized the screen was also off and beeping.
I thought maybe I had to enable the DWIN_CREALITY_LCD (Ender 3 V2 stock sc…
ghost updated
3 years ago
-
Hi,
I just wanted to switch on my Ender 3 V2 from Jerk to Junction Deviation. After disabling Classic_Jerk in the configuration.h file, I get numerous errors because basically everything in dwin.cpp …
-
Apologies if this is in the wrong place, it is not obvious where to put such a question.
I have the V8.0 tools from the supplied link and it's fine. However, I am unable to find the English versio…
-
### Bug Description
When printing from SD card and the print reaches `M25`/`M125` without `P1` parameter, the following happens:
1. Printer gets ready for pause and completes the rest of t…
-
### Description
When you uncomment the line `#define FILAMENT_RUNOUT_DISTANCE_MM 25` in `Confiruration.h` then attempt to compile using Platformio, it fails with the error ....
```
Marlin\s…
-
Hi,
First, thank you for your work and well probably im asking for more work 🤣
However, is it possible that lets say you remove everything of the display and give just a possibility to add icons a…
-
Hello.
I'm thinking abut committing some time to this projekt. And my current problem is i don't see the flow rate on the screen, so i wanted the software change between the feed rate, and the flo…
-
### Description
Babystepping doesn't work. The value changes on the LCD and is saved. But the nozzle doesn't move. I need to make adjustments, stop the print, restart the print and only then it…
-
### Description
In order to make the manuel leveling independent from the leveling mesh the board issues a command to disable the mesh. The correct command for this is `M420 S0` - however the print…
-
In the ExtensibleUI branch, `Marlin/src/lcd/extui/lib/creality_dwin/creality_dwin.cpp`, function `CrealityDWINClass::Get_Menu_Title()`, I was getting warnings about using `strcat()`. Since these stri…