-
I have the following setup:
1) A packet forwarder and the lora-gateway-bridge on a LORANK8 gateway,
2) The loraserver on a PC running Ubuntu 16.4,
3) An MQTT.fx client on another PC running Ubuntu 16.…
lg007 updated
8 years ago
-
Hi again!
I use loraserver [the](https://github.com/brocaar/loraserver) - "lora gateway bridge 1.1.5" and i have the following error
`time="2016-07-06T10:50:57+03:00" level=info msg="gateway: recei…
-
lora_pkt_fwd : Version 3.0.0
log_lora-gateway-bridge : Version 2.1.0-3-gedf27bf
when I subscribe gateway's rx
time was not set like this.
"time":"0001-01-01T00:00:00Z"
log file is below.
[log_lor…
-
Is it possible to add the frame count and SNR value to the devEUI structure? It is useful to monitor the state of some of the sensors (restarts etc) and it would be useful to have it in the incoming j…
-
go get github.com/brocaar/loraserver/...
then use commend 'make build' to build from the source code but error occur:
# github.com/jmoiron/sqlx
../../jmoiron/sqlx/bind.go:142: undefined: strings.Inde…
-
Must be able to receive and send LoRa packets. Integrate this with the previously implemented message buffer that is able to communicate with APM planner.
-
If it is possible, please include an example on how to send data (payload) to the end nodes. If I am not mistaken, currently there is no example for sending data only for receiving it. Thanks!
lg007 updated
8 years ago
-
Hello!
First of all thank you for you efforts for building up the lora server. Everything easy to use and have a great documentation.
I have a iC880A + Rasp Pi 3 gateway with Microchip LoRa Mote (R…
ghost updated
8 years ago
-
hi, brocaar,
Now it's working fine to use mosquitto_sub/mosquitto_pub to send/get rx/tx data followed by your loraserver document :smile: thx a LOT.
And then I want to try mac command, could you g…
-
Hi,
I think it will be helpful at some point of time to add some access control to the web API. As I am going to need that soonish, I have started looking into possible solutions. So far the use of [J…