issues
search
Octanis1
/
Octanis1-Field-Station
Software that runs on the Raspberry Pi in the field. Acts as a LoRa tranceiver and MAVLink protocol handler. Must accept and relay MAVLink commands from APM Planner / QGcontrol.
4
stars
1
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Enable and test static hold on rover gps module
#15
bitmorse
opened
8 years ago
0
UDP_MQTT stops working after some time
#14
bitmorse
closed
8 years ago
1
Connect dGPS to USB2Ethernet adapter verify if RTCM3 still correctly received by rover (because now additional UBX+NMEA arrive on radio)
#13
traffael
closed
8 years ago
0
Setup ethernet switch + cabling
#12
traffael
closed
8 years ago
0
correct UDP_MQTT to introspect the MAVLink message
#11
bitmorse
closed
8 years ago
0
Test APM Planner sending to Rover via LoRa
#10
bitmorse
opened
8 years ago
2
Test correct reception of RADIO_STATUS in apm planner
#9
bitmorse
closed
8 years ago
0
Field Station monit configuration to run python scripts
#8
bitmorse
closed
8 years ago
0
setup windows 10 on x61 laptop
#7
traffael
closed
8 years ago
1
configure dGPS base station module
#6
traffael
closed
8 years ago
1
Create a UDP to MQTT bridge
#5
bitmorse
closed
8 years ago
3
Design Case and power supply for the Field station
#4
traffael
closed
8 years ago
1
Install brocaar's loraserver and lora-gateway-bridge
#3
traffael
closed
8 years ago
2
Install and configure LoRa concentrator driver & semtech packet forwarder
#2
traffael
closed
8 years ago
1
On the RaspberryPi, write script that listens to APM Planner and buffers those incoming messages
#1
traffael
closed
8 years ago
0