-
I bought an electric blanket which has tuya control of the individual controllers.
Trying to add it into OpenHAB. The 2x controllers are detected fine, but report "CONFIGURATION_ERROR
No channel…
-
i have trouble getting sensor reading of standard Schrader TPMS sensors (434MHz)
a bit strange since they a very commonsense , mostly Fiat-Chrysler (eg. my Dodge) and Mercedes aso
I compared its sim…
-
i wanted to run ur code on an arduino as a sender and a raspberry as a reciever but althought both code seems to be working just fine ,there is no paquet recieved in the raspberry .
-
### Describe the enhancement you're suggesting.
Currently, Malaysia is listed under
![image](https://github.com/flipperdevices/flipperzero-firmware/assets/22954096/27de0a89-85ef-435f-a2d4-d5d0b81…
-
Hello,
In your readme you are talking about the 33ms being a problem. Any way to debug this? Since my fan is not responding.
Would it be the best to just try timings? Or scope and tune?
Also, y…
-
**Hi i have a question. This device can record the raw RF data and play it. When I use it with my garage door, it records and plays the raw RF data properly, allowing me to open the garage door. Howev…
-
There're two main frequency ranges - 315 MHz and 433 MHz.
When I want to learn a 315 MHz RF, it works fine if I assign the frequency in the app. But if I do sweep frequency through this command line…
-
Over the last week or 2, several users reported purchasing a hub, but can't get the RM Bridge to find it. In order to understand whether this is a change to the new Broadlink devices, please post if …
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …