-
Hi,
thanks for sharing the project knowledge, with details.
how can i find the L and C values for the RF part tuned for 868 MHz (EU)?
-
The file name is
LilyGO-TTGO-LoRa32-ESP32-T3-V1.6.1.txt (see .........V1.6.1.txt)
but inside I read V1.1.6
/*
Project Name:
Hardware: LilyGO TTGO LoRa32 ESP32 T3 V1.1.6,
…
Ranoc updated
2 years ago
-
I can select the frequency band @ 433E6, 868E6 or 915E6. But how can I select a respective channel? To my Knowledge LoRa allows for diffent channels inside a band, e.g. for 868MHz:
Channel Number |…
-
### Type of request
New device support
### Meter description
Hello,
I am very sorry for the beginner question but I could not get any information from the wiki on this device and I also trie…
-
I have a small ESP-IDF Project for a Lilygo T3 S3 board (SX1276). I'm trying to receive data from Ecowitt WH51 sensors (868MHz FSK, various sources claim 868.35MHz should be used for best results). I …
-
### Category
Other
### Hardware
T-Beam V1.1
Tested with 433 and 868 variant
### Firmware Version
v2.2.0.9f6584b
### Description
I just Web-flashed the latest 2.2.0.9f6584b Alph…
-
The main reason for this problem is that for Low symbol rate you have to initialize REG_LORA_MODEM_CONFIG3 on different way. Bit3 - LowDataRateOpotimize.
Simtech says for symbol lenght under 16msec S…
-
I'd like to see support for this protocol.
I know that this is open source, and I'm happy to contribute, but it's a little difficult figuring out how to start. Not the github stuff, or the tool ch…
-
### Type of request
Bug
### OS version
Debian 11
### wmbusmeters version
1.16.1-18-gc1509f6
### Your message goes here
Hello!
After some time of working without problems, I suddenly get a ti…
-
```
What steps will reproduce the problem?
1. Compiling on IAR 5.20
What is the expected output? What do you see instead?
I do not know which is the text format of executables.
IAR 5.20 Kickstart sa…