-
Hi.
I am trying to operate multiple pluto-plus at the same time.
so, i changed the ip address and host name in config.txt file each pluto
However, there are some issues like recognizing the pluto …
-
... doesn't work at the moment. I don't know why.
use "ip:192.168.2.1" for now.
-
Not yet documented, sorry, here is a short example to access GPS from SDR4space.lite
- You have to launch SDR4space.lite with following parameters (adapt to your setup):
````
-g, --gps arg…
-
While trying to use dump1090 with a bladeRF 2.0 micro xA5 I am getting multiple errors, seemingly related to the sample rate. I've tried with both the [hostedxA5-latest](https://www.nuand.com/fpga/hos…
-
Hi @noelpedro,
I have a version of your HDL running on a ZCU102 with an fmcomms2/3 card.
I'm seeing some strange behavior where my correlation results all drop and then re-adjust. This causes t…
-
- [x] Raspberry Pi OS (not buildroot since we'll want to use SDR softwares).
- [x] Check m2sdr_util info.
- [x] Check m2sdr_util dma_test (if not working or freezing, still continue testing the othe…
-
Hi, I'm a student interested in FPGA and want to learn more about SDR, especially AD936X based ones. I wonder if it's possible to have AD936X extension boards for low-cost FPGA platforms like the PYNQ…
-
there is an other SDR software, where the PlutoSDR has much more functions available as on the plugin here. maybe you can pick some options from there and put it to your plugin...
[PlutoSDR input p…
-
0. Could you send email to [xianjun.jiao@ugent.be](mailto:xianjun.jiao@ugent.be) to introduce your self?
Sent
1. Our image is used directly or you build your own image?
I used the image "openwifi…
-
Hi @noelpedro
I noticed you worked on this project for a while (have seen your questions in the GNSS-SDR repo). Unfortunately, the GNSS-SDR authors did not share the RTL implementation of the HW ac…