-
I am attempting to run the following code as a prelude to writing data to an SD card on an Adafruit Feather M0 Adalogger. This is part of a larger code, but, if I run just this snippet, I get the err…
-
The Pi Pico has 2 physical cores, but only one core is usable in CircuitPython. Micropython has limited multicore functionality when used with the pico, allowing the user to start a separate task whil…
-
The [Getting Started Readme](https://github.com/COAST-Lab/Open-Water-Level/tree/main/Firmware#getting-started-with-cell-enabled-water-level-sensing) in the firmware subdirectory has a section on using…
-
Should I care about some compile warnings?
I installed the CSV Parser 1.0.1 library in the Arduino IDE 2.0.4 and adding #include to one of my source files.
Without other code, the IDE compil…
-
### Subject of the issue
myGNSS.begin() returns false
### Your workbench
Using Arduino v2.2.1 & CLI 0.34.0
Behaviour has been confirmed on both Sparkfun NEO-M8U & NEO-M9N boards
Behaviour…
-
This is a discussion on HAL and I share it in the hope it remains open for identifying what works to abstract and is easy. (2019Aug11 updated to reflect code changes)
For software targeted at multi…
-
I have a m0 adalogger with the 900mhz lora wing
i have an m0 lora feather
i download example code from
https://learn.adafruit.com/radio-featherwing/circuitpython-for-rfm9x-lora
on the m0 lora…
-
I am trying to get the gettingStarted working on a Adafruit feather M0 processor but it will say "radio hardware not responding". I have tested this same code on a feather 32u4 and it works flawlessly…
-
Hi all, I have just purchased a LoLin32 Pro for a home project where I need to log some data to an SD card. I am trying to initialise a Micro SD card through the onboard Micro SD slot using the SD lib…
-
#### Description
A SD card attached to the lora-e5-dev board does not work.
#### Steps to reproduce the issue
To quickly test I added this to the `boards/lora-e5-dev/include/board.h` file:
…