-
When I change the lib_deps path from SignalK/SensESP to https://github.com/SignalK/SensESP.git#latest it doesn't seem to give me the proper version. Most notably, the ads1x15 code is missing.
I am…
-
- [x] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
### Configuration
**Operating system**:
Host machine: Windows 10
Docker container:
```
FROM pyth…
-
I don't know how to change the example to work with circuitpython 8, I think this detracts from the usability hugely. I hoped i could just setup an MQTT client from minimqtt (set broker details) and p…
-
I've implemented an ON/OFF relay for controlling my dew heater and have the indi-allsy 'Dew Heater - Standard' working - thanks for adding all this in, it's been timely for us down-under!
Is there…
-
mahjongAsst measures RLC values by ADC readings.
Naturally, its accuracy, especially for resistance measurements, depends heavily upon performance of the internal ADC.
For example, I recently tried…
-
Hi,
I tried to fill in your code but I found some problems
_git/_tomstix/esp32-aog $ pio run
Processing featheresp32 (platform: espressif32; board: featheresp32; framework: arduino)
---------…
-
I've just pulled the latest, and I've been through and updated everything platform and library, but when I try to build either the esp8266-dev project I just get ton's of errors:
Processing esp8266…
-
Hi all,
I have already updated my Python 3.9 to 3.11 but found that my existing Python script can't work. It can not detect ads1x15 and INA219. I would like to know what the news is now?
Bes…
-
so did a short test
measured the RDY-pin on an oscilloscope
in single shot mode RDY remains high/low until the next request is made (not just a pulse)
but COMP_POL seems to be switched
CO…
-
Not a major issue but...
1. add the 1-wire interface to REM
2. go to the 1-wire device list
3. name each DS18B20 device and save it
4. save settings on main panel
5. note that probe names are l…