-
I have a setup with original hoverboard control board and battery and one sensor board connected to the right connector with RX/TX bridged to the left connector.
My right motor has two switched pha…
-
Title. I've been looking for FOC libraries in the rust ecosystem, and there don't seem to be any that are supported; I would consider rewriting my own, but I am not super experienced with motor contro…
-
* rpi-deep-pantilt version: 1.0.1
* Python version: 3.7.3
* TensorFlow version: 2.0.0
* edgetpu version: 2.15.0
* tflite-runtime version: 2.1.0.post1
* Operating System: Raspbian 10 (buster)
#…
-
continued from https://github.com/Candas1/Split_Hoverboard_SimpleFOC/issues/4#issuecomment-1604941688
> In the past, I had problems with SimpleFOC due to the limited speed of the encoder readings. …
-
Hello!
A wonderful job! Can you help me a little bit with the speed_to_pwm ration. How did you obtain it?
All the best!
-
Hello,
I am using the system in an industrial machine, USART driven and motor controled FOC in SPD_MODE, the commands to the howerboard were send by ESP8266 wich is driven by a linux app using UDP pr…
-
**Describe the bug**
Sometime after SimpleFOC2.2 a bug was introduced that made the phase current reading bad, the symptoms were bad stability and noisy FOC Torque mode. The phase currents looked dis…
-
Okay i added my I2C-Client code to my Split_Hoverboard_SimpleFOC and it runs :-)
But the motor now heavily stutters :-(
I guess the SimpleFOC::I2CCommander has not yet been tested with the GD32-Ar…
-
Hi, first of all thanks for providing precompiled binaries, I can stop spending my time trying to get it to work with PlatformIO!
I have flashed [hoverboard 2.0 slave.bin](https://github.com/RoboD…
-
Hi
As discussed in sFoCCommunity, there might be room for improving the communication between the controller and sFoCStudio, if the controller has a virtual USB port, capable of 64bit (full speed) …