-
Hi, is there any chance to use a free IO-Port to power on/off the board (Lilygo T-Beam v1.2 with AXP2101)?
I'd like to use other buttons in a housing.
73 de Thomas, DO4FT
-
flashed some versions
23.36.1
23.36.0
22.19.0
on my LILYGO T-BEAM 1.2
After successful compilation and upload, the software restarts continuously.
Errors can be seen on the serial monitor:
…
-
I have Tbeam T22_V1.1 20210222 Ublox NEO6M
My Tbeam not send out NMEA protocal.
I did as in https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/firmware/NMEA_Reset/README.MD
Not …
-
Hello guys! Can you help me, please.
Version: 2.0, Open edition
I have used it a little bit and now i can't turn it on with pwr button with battery installed.
It works with external power supply…
-
I'm trying to get a tracker to run with the board t-beam V1.2. Unfortunately so far without success.
I installed VSCode and Platformio on a fresh Win11 according to the instructions. Then imported th…
-
Good morning,
I have tried to insert my TTGO T-BEAM AXP2101 V1.2 with a SPI SD card module. I will send you the code and pinouts I used to connect. I have run the code and there are no errors. But…
-
Seems newer T-BEAM boards (sometimes calls V1.2 but mine's marked V1.1) have a new PMU chip, APX2102 instead of APX192.
The symptoms are that transmission never starts, it's as if the transmitter i…
-
I've tried two different hardware, both TBeam-AXP2101-V1.2, one with NEO-6M GPS module and another with NEO-8M. Neither get GPS fix after a day outside.
Do we need code changes related to AXP2101 l…
-
Hello,
I have AXP2101 and I would like to adapt code (in the board detection part - and other places where it code should be changed).
I was wondering if there are some existing documentation abou…
-
The AXP192 on the LilyGo T-beam 1.0 is behaving really unpredictable.
I believe there is some chicken-and-egg problem here as the display is not powered which may stall any I2C communications.
N…
TD-er updated
2 weeks ago